OLI interactions Questions

[NARSBARS]

I want to send set specific outgoing CLID on a 6.1 MICS with PRI, using no business name.
I have several settings I am questioning
OLI as called number Yes or No
Caller ID Set Yes or No
Are there any other settings that have gotchas?
I want each set to receive incoming CLID and to send outgoing CLID and I am assuming that it will follow the OLI ten digit entry for each station.
For whatever reason this has given me headaches.
Any help greatly appreciated.

NARSBARS

 

[NARSBARS]

I should have added in the CLID question that the Outgoing CLID can be made to work in 6.1 but I cannot make it work at all in 4.1, or 5.0.

NARSBARS

 

[luv2ski]

i have found that if the provider allows it... it will work..

ski season has started

 

[jgideon]

You don't have the option of sending number but not name. In the US, name is retrieved by the _receiving_ telco through a database lookup. If your LEC/CLEC puts names in the database, and there is a billing arrangement between the receiving telco and the holder of the DID's, then the far end _may_ display name. Some companies don't ever look up name.