OLI digits not displaying Caller ID info

[viviann17]

Have a BCM 450 Release 6.0 with PRI and 2 blocks of 100 DIDs. Have correctly programmed DNs with public OLI, however test calls from DN only display the "Billing Telephone Number (BTN). I've verified with LEC (AT&T) that the PRI has been programmed to send all digits. AT&T says "CPN Options" are set to "don't screen/don't discard". Have placed test calls from BCM in AT&T service area routed thru another BCM 450 with another local service provider (CenturyLink) and OLI digits are correctly transmitted and received. Based on that result, I'm guessing BCM programming is good and that this is an AT&T PRI configuration problem.

Comments?? Suggestions? Thanks!

 

[curlycord]

Try turning off business name in programming.



=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[viviann17]

Unfortunately it only impacted Priv OLI not Pub OLI.

 

[NAA9983]

What is the region of your BCM, try to make it global and try again

 

[cook1082]

Do you have the MCND licenc loaded.