lowradiation
Technical User
I've come across and older smdr unit. It had a 9 pin serial port on the top. Does anybody know the pinout for this unit?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
older smder units 1
- Thread starter lowradiation
- Start date
- Status
-
1
- #2
- Thread starter
- #3
lowradiation
Technical User
Does this mean a RAD and an older SMDR have the same pinout?
If so, thanx.
If so, thanx.
Oh good grief. I need a vacation. Sorry. Here ya go.
9 pin connctr 25 pin connctr signal name direction
1 not used
2 3 RX Data From SMDR
3 2 TX Data To SMDR
4 20 DTR To SMDR
5 7 Signal ground
6 6 DSR From SMDR
7 Not used
8 5 CTS From SMDR
9 Not Used
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
9 pin connctr 25 pin connctr signal name direction
1 not used
2 3 RX Data From SMDR
3 2 TX Data To SMDR
4 20 DTR To SMDR
5 7 Signal ground
6 6 DSR From SMDR
7 Not used
8 5 CTS From SMDR
9 Not Used
MRoberts
mroberts@americaii.com
If you find a tip helpful, please mark it as such.
- Status
Similar threads
- Locked
- Question
- Locked
- Question