I have been using the original Ver 4 software to program 816/1232 for 20 years went to use it last week and i get an error code of communication line disconnected. have ck my com port, changed cables, reloaded software, no luck.
have downloaded the new windows software td1232 from the web site and it works, same cable, com port, on any 1232 i go into but i still like my old software version. my com port will get some line data from just connecting by the hyper terminal pulling smdr reports, so it see the com port. can only assume the software has gone bad but open for suggestions. have changed setup on the com port and in the default setting 8n1 but still same error code. does anyone know where to get the older version first generation software on line.
thanks
have downloaded the new windows software td1232 from the web site and it works, same cable, com port, on any 1232 i go into but i still like my old software version. my com port will get some line data from just connecting by the hyper terminal pulling smdr reports, so it see the com port. can only assume the software has gone bad but open for suggestions. have changed setup on the com port and in the default setting 8n1 but still same error code. does anyone know where to get the older version first generation software on line.
thanks