Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

old carbon/gas lightning protection studs

Status
Not open for further replies.

avayanooby

Programmer
Feb 20, 2007
26
US
Any good ole Bell Techs out there ?

I am looking for replacement studs for the old Western Electric Telephone Line Carbon Block Arrestor model 134A1A-100. Primarly used for commercial point of entry lightning protection many moons ago. Thanks in advance for the assistance.
 
Been doing this since 78 but not sure of the equipment type. If it's 2 or 5 pine goe with Oneac they are surly the best. If they're not what I'm guessing, call Oneac and they'll help.

Frank. City of Cape Coral, Florida
 
You might check these manufacturers for replacement carbons/gas elements: Siecor, Commscope, Circa Enterprises, Emerson Network Power (Reltec/Reliable Electric), and TTI.

There may be others, those WECO protectors have been MD for years. Anixter carries several of the above suppliers.

Hope this helps!

....JIM....
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top