Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OG CLI

Status
Not open for further replies.

reebokman

Technical User
Aug 9, 2007
71
I have a customer who has a DDI number to a HG, they want the members of the HG to send out the DDI number when they dial out. I have set against each user shortcode " ? .Sxxxxxxxx(DDI) number OG group 0" but it still send out the bearer number. Can anyone suggest something else? I have done this many times before but for some reason this one wont play ball.
 
If there is a more specific match (even in system shortcodes) that will break it :)

NTE-wave-logo-for-a4-header.jpg
 
Try Si instead of S

-Austin
ACE: Implement IP Office
 
Make sure the number xxxxxxxx whatever is in the correct format for the carrier some carriers dont want the toll prefex and others do. Also look at your Layer 3 ISDN trace on monitor to see whats been sent out you should see you DDI in the TX field


[cheers]
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top