We currently have a Definity G3 Version 7 ECS at our main location. We have another store half a block away. What is the easiest least expensive way to tie them into our phone system. I cant see paying $500 a month for a PTP T1 for such a short distance and im not able to do a wired install seeing as theres a street between use. Im looking to connect them to our network wirelessly probably with some breezecom equipment. I would also like to send the phone traffic over the wireless link. Ive heard about definity extenders ive also thought about installing a second switch at the location or a less expensive partner system if that could be tied into our existing definity system.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Offsite Location
- Thread starter WGross
- Start date
I am not sure if you can do the ip phones on a v7, I think you might need an upgrade.
The one suggestion I would make though if you go the wireless route and especially if you try to do voip with it
and that would be to use a directional antenna system even though it seems close, you will want to make sure there is no degradation of the signal.
The one suggestion I would make though if you go the wireless route and especially if you try to do voip with it
and that would be to use a directional antenna system even though it seems close, you will want to make sure there is no degradation of the signal.
- Status
Similar threads
- Locked
- Question
- Locked
- Question