Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Offnet call to bypass autoattendant

Status
Not open for further replies.

terrysdavid

Programmer
Jun 6, 2006
350
TT
Hi,
I'm trying to set up an offnet call from PBX A (CS1000E HA Rls 7.6) to PBX B (CS1000E HA Rls 7.6).
When a user at PBX A dials a DN (7428) which is cdp steering code, I want it to ring on DN (7428) on PBX B. So far, after configuration and testing, from PBX A I can dial 7428 and get the automated attendant at PBX B.

Is there a way to bypass the automated attendant at PBX B so that users at PBX A don't hear the automated attendant from PBX B?

Best regards
 
It sounds line 7428 programming on PBX B might be forwarded to the voice mail?
Can you reach other extensions when dialing from PBX A to PBX B?
 
The two sites were originally connected via H.323. But for business reasons we are separating into two companies. Prior to the separation, 7428 was a distant steering code on PBX A.

Essentially I can get the calls to hit the automated attendant on PBX B. I just want to bypass the automated attendant on PBX B to get to extension 7428. Calls leave PBX A via a PRI and calls reach PBX B via a PRI.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top