Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Officeserve 7100 line routing setup

Status
Not open for further replies.

russ0670

Technical User
Feb 15, 2013
1
GR

Hi bit of a newb im afraid. we don't have Samsung official support in Cyprus but my office inherited a officeserv7100

I have looked through all literature i can find but am swamped with it. Can anyone pull me in the correct direction.

I have 3 incoming lines on 701,702,703 (standard analog lines)

I have 5 stations 201,202,203,204,208 (Keyset Model DS5007S)

what i am trying to setup

Stations 201,202,204 to use lines 701,702 for Incoming and Outgoing only. (I would like when 9 is pressed for outside line it to only select either 701 or 702)

Stations 203,208 to use line 703 only. (I would like when 9 is pressed for outside line it to only select 703)

I would also like 203,208 to be able to pickup line 703 if they hear it ringing and no-one is at the desk.

I would also like to use the station keys to join or un-join either of the two groups.

I have been testing settings changes every which way but i cannot seem to get the above setup.

Any help would be greatly appreciated.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top