I have an Octel 350(Aria 1.2) connected to a Definity G3SI V6
I am trying to figure out the current integration
I was able to pull screen shots
PBX has vector that routes to individual stations (analog ports) it looks like
Octel350 says it has 144channels purchased with 72 used
active line cards show 2 ATICS and the rest T1s
Want to migrated to CM5/S8730. trying to figure out if this octel which looks perfect can be used on CM5. I assume I can if I use mode code or DSE but I'm weak on the octel
Any help would be appreciated!!!!!
I am trying to figure out the current integration
I was able to pull screen shots
PBX has vector that routes to individual stations (analog ports) it looks like
Octel350 says it has 144channels purchased with 72 used
active line cards show 2 ATICS and the rest T1s
Want to migrated to CM5/S8730. trying to figure out if this octel which looks perfect can be used on CM5. I assume I can if I use mode code or DSE but I'm weak on the octel
Any help would be appreciated!!!!!
