Octel to light different phone

[coniglio]

I built a dummy 500 port with a new DN to hunt/fna to voicemail (I have an opt. 61c 25.40 and an octel 250). I then put this new DN on key xx of my receptionist's 2616 set. She does not have a mailbox of her own on this phone. I need to make sure that when a message is left for this new DN her M2616 message key comes in. Is the parameter in the Octel that I need to change? if so, please tell me which parameter. Thank you.

 

[kxboy]

What kind of system do you have? 100/200/300 or 250/350?

 

[coniglio]

I have an Octel 250. However, we've scrapped this idea completely so I don't need to make this work. Thank you anyway for your response.

 

[kxboy]

Just in case you need to do this in the future, on the 250 the subscriber extension field is used for the number to set the MWI. It is also used as the transfer destination, so if anyone uses a auto atendant and they will also be transfered to the extension in the subscriber extension field.

 

[KenMeans]

Kxboy:
They will if verify ext is on in menu 2-2 if not it will transfer the call to the ext dialed even if the ext does not appear in a mailbox