octel not booting

[senk1s]

hello ...

just moved an octel 250 and definity G3siv9 to a new server room.

hte octel would not bootup/ or give access to the modem to login. the WYSE terminal has not been working for sometime

when shutting down, i did a shutdown with dump and then pulled the plug

i tried booting without the FLT8 board - same problem
OOS/SA/NSA alarm lights on

any sugestions welcome - the move has to be completed by teh weekend.thanks in advance

 

[senk1s]

apparently the only working serial port died during the move ... we had to change the CCF board and everything went ok.
i had a fun weekend with an RS232 port !!

 

[KenMeans]

dial into the modem before you power up the octel and make sure that there is not anything connected to the console port if you still don't see anything you may need a new ccf card.

 

[senk1s]

thats what we did !! thanks KenMeans

 

[KenMeans]

and did it work ??