thread923-1376417 - Connected to an Octel 250 with a USR modem. After conetcing screens update very slow then after aprox 60 seconds drops call. Have swapped modem, cables with known good ones from another site. Moved to another inbound and outbound phone line and replaced the CCF card with 3 others (Still possible bad cards as they are so old).
Can connect to other remote sites with laptop and procom fine. Just this one site drops calls and screens move slowly. Is there a config somewere on the system or the CCF that can be adjusted? or any other irtems I can check/replace?
Can connect to other remote sites with laptop and procom fine. Just this one site drops calls and screens move slowly. Is there a config somewere on the system or the CCF that can be adjusted? or any other irtems I can check/replace?