Octel IP Access Administration 1

[telcomwork]

Could someone tell me the approximate cost and steps to place an Octel on the network so we can administer over IP instead of analog. I'm assuming if you administer over IP you can simultaneous connections? Is there other way to have simultaneous connections?

Thank You!

 

[KenMeans]

What kind of Octel is it?

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[telcomwork]

Apologies not used to working with Octel's. What menu option would give me this information?

 

[KenMeans]

menu 13 7 if it is a aria 250 or 350

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[telcomwork]

TY.
One is a 250 and the other is a 350.

 

[KenMeans]

Ok on a 250 or a 350 you can not use the LAN card to administer the system. The only way short of writing your own program is to use telnet server like the uds10. It will convert the rs232 to IP and then you can use ProComm to telnet into the Octel.

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)

 

[telcomwork]

Can you have multiple simultaneous connections so more than one person can access teh system?

Thank you for your help!

 

[KenMeans]

Only if you have multiple telnet servers on the system. You can only have a total of 3 if you are not using RS 232 for the PBX

Ken Means

http://www.tel-is.com

"I find that the harder I work, the more luck I seem to have."
- Thomas Jefferson (1743-1826)