Octel 250 remote using ASA ( AVAYA site Administration)

[papagigo1]

I'm trying to use ASA software to modem connect to an Octel 250. I get both modems talking and get the standard Octel info scroll, then "login=2F) and can't proceed from there. I think the set up and emulation type is wrong. Does someone have a set up like this that could give me a heads up?

Thanks in advance
Mike

 

[KenMeans]

i have used the ASA before for this and it worked fine. You need to make sure that the emulation is set to Wyse 50. if that does not work check in the octel under menu 6 sub menu 3 and look at the service port for the type of emulation.

let me know how it works out.