Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

OCCLA

Karmozdi

Technical User
Feb 18, 2019
119
US
Hi everyone
Please help me. what to do on the OpenSqape x8 device with the OCCLA module to have a signal on the Optipoint500 phone. The Openstage phone is active, but
Optipoint500 is inactive
Best regards
 
Hi,

Optipoint5000 has stopped supporting the X8 series. The only solution to replace the latest digital phone now.

Regards,,
 
Hi,

Optipoint5000 has stopped supporting the X8 series. The only solution to replace the latest digital phone now.

Regards,,
Not quite, If you have a X8 with OCCL (so the "old" motherboard), you can upgrade the software to V3 and still use OptiPoint 500 phones.
But if you use the newer OCCLA the optiPoint 500 phones won't work anymore.
The same goes for X3 and X5 systems if you upgrade the hardware to an OCCMA(R) or OCCMB(R).

1731245400283.png
 

Part and Inventory Search

Sponsor

Back
Top