When I run the following command the status always remains 0 and program hangs. This only occurs on Windows XP machines running the REG.EXE program, ok on NT4
set oExec = objshell.exec ("reg query ""Hklm\software\microsoft\windows nt\CurrentVersion""")
do while oExec.status = 0
wscript.sleep 100
loop
Has anybody had this problem and if so do they have a workaround
set oExec = objshell.exec ("reg query ""Hklm\software\microsoft\windows nt\CurrentVersion""")
do while oExec.status = 0
wscript.sleep 100
loop
Has anybody had this problem and if so do they have a workaround