i have an option 11c with DID's that have 2 diffrent NXX's. one is 323 and the other is 247. whenever i call out of the pbx dialing from a DID that starts with 247 i get an ANI with the 323 nxx instead every time. is there a way to make this send the right ANI every time?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NXX or ANI question
- Thread starter WYREDAWG
- Start date
You have to create a seperate CLID table in LD 15 under your net_data. You then have to associate the DN on the phone with that CLID table entry. For exmaple if your CLID table with the 247 NXX is table number 1 you would enter the key on the phone like this:
KEY 0 SCR 450 1
KEY 0 SCR 450 1
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question