Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NWS211

Status
Not open for further replies.
jhenley

jhenley

Technical User
Jun 10, 2005
104
US
NWS211 on fiber IPE loop, NWS301 on shelves. Sets are working fine on shelves, so not as critcal as code indicates. I have rolled all cards cables boxe etc. with another loop. Trouble stays with failing loop. This leaves Physical Shelf, something in network group or switch software. Same on both cpu's and clocks. I know of another customr that changed out backplane on shelf and didn't clear but they couldn't remember what cleared the issue. Anyone had this problem and remembers what cleared. INI doesn't clear. I am wondering about an issue with FIJI on the network shelf.

JHenley
 
Sort by date Sort by votes
i've seen a bad conf/tds cause that, and it was just a bad channel.. the card was working, nothing looked broke but that card failed the test, replaced it on a diff issue and my nws went away

john poole
bellsouth business
columbia,sc
 
Upvote 0 Downvote
I swapped between conf/tds cards on the network group by making the other card active but didn't actually change it out. I'll try that today.
Thanks for the info.

JHenley
 
Upvote 0 Downvote
Unfortunately changing out Conf/TDS didn’t clear the problem. Anybody else got any ideas.

JHenley
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

coameno
  • Locked
  • Question
NWS211 24 0 1
Replies
5
Views
90
coameno
coameno

Part and Inventory Search

Sponsor

Back
Top