Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

nwadmin32.exe will not load

Status
Not open for further replies.

HighlandTankMIS

IS-IT--Management
Dec 21, 2005
1
US
Situation:
Can't get nwadmin32.exe to run; when I double click or use RUN command I see a brief hourglass, then nothing. Nothing listed in the Windows application error log. Just won't start. I can run it from other work stations fine.
Windows XP Pro SP2 - runs fine otherwise
Novell 6.0 - working fine
I've tried turning off the firewall and anti-virus to test, but no change
All other applications I run are fine including rconj.exe. I can ping the server using IP address or name, so DNS isn't issue.

I can't find anything on Google to help and I've checked in this Forum's Advanced Search. Found thread about someone having trouble loading nwadmin in order to work on NDPS, but turns out that was fixed by loading lasting client.

I did try the flag /DISABLETLSMGR, but that made no difference.

Following is a directory listing from the snapins:
3/02/2000 11:09 AM 11,776 audit32.dll
08/31/1999 11:08 AM 7,168 EPSNAPIN.DLL
10/29/1998 05:13 AM 174,592 MANAGEIP.DLL
02/08/2000 11:27 AM 153,600 NCSSnap.dll
08/23/2002 04:26 PM 368,640 NDPSW32.DLL
08/02/2000 09:26 AM 561,152 NLSMGR32.DLL
07/12/1999 01:33 PM 28,672 NWIEASST.DLL
11/04/1998 10:48 AM 78,848 NWSLPSI.DLL
12/11/1999 10:49 AM 195,072 REGEDT32.DLL
 
The IP address and DNS are pretty much irrelevant. You are running NWADMIN from a MAPPED drive?

You could try downloading NWADMIN from Novell's site at download.novell.com, install it locally and try that.

But if it works on other systems, I"d have to say it's most likely a workstation issue.

Marvin Huffaker, MCNE
 
Marv...I am having this same problem. I noticed this after upgrading my client to 4.91 not that it is related. I looked for the NWADMIN download on download.novell.com but didn't find anything. I've done everything I can think of on the workstation to get this to run.

Any other suggestions?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top