Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NW5/W98/Zen2/Zenclient&sp2 "Winsock IP address conversion failure"
- Thread starter DBSikes
- Start date
Hmmmm, you might try putting the client software on your c: or d:, go to the admin directory in the client software and completely remove the client software and then reinstall it.<br>
What looks like is happening is that somehow the winsock.dlls didn't get updated. During the normal NetWare client install, Novell actually runs a Microsoft update to the winsock.dll. Or are you running some special software that changes the winsock.dlls back to some private ones???<br>
Maybe you don't have to remove the client but just try first reinstalling it?
What looks like is happening is that somehow the winsock.dlls didn't get updated. During the normal NetWare client install, Novell actually runs a Microsoft update to the winsock.dll. Or are you running some special software that changes the winsock.dlls back to some private ones???<br>
Maybe you don't have to remove the client but just try first reinstalling it?
- Thread starter
- #3
I did reinstall the client, then upgraded the client to 3.2<br>
<br>
The problem lied in the policy where I was not pointing to the IP address of the server the Zenworks Inventory was located. I was using a DNS name. Novell has a TID #2952941 which addresses this. <br>
<br>
Thanks for your response and help.
<br>
The problem lied in the policy where I was not pointing to the IP address of the server the Zenworks Inventory was located. I was using a DNS name. Novell has a TID #2952941 which addresses this. <br>
<br>
Thanks for your response and help.
- Status
Similar threads
- Locked
- Question