jochenwestland
IS-IT--Management
Hi there,
i am running arceserve 6.1 with the actual patches applied on a Netware 4.11 Server with service pack 9.
For backup i am using two Sony SDT-9000, organized in a device-group.
Well, fine, so far.
Every time i run a backup, either arcserve stops its duty while backing up or while comparing with an
Error E1051 (failed to rewind tape) at one of my devices or it simply stops backing up due to a missing tape or sth like this (with 2 tapes loaded, one empty) and an ErrorE1058 (Unrecoverable data error).
Well, i already replaced nearly my whole hardware, including my tapes, but i am not able to back up this darn server.
Has anybody made such an experiences as well and has a hint for me??
Tanks
Jochen
i am running arceserve 6.1 with the actual patches applied on a Netware 4.11 Server with service pack 9.
For backup i am using two Sony SDT-9000, organized in a device-group.
Well, fine, so far.
Every time i run a backup, either arcserve stops its duty while backing up or while comparing with an
Error E1051 (failed to rewind tape) at one of my devices or it simply stops backing up due to a missing tape or sth like this (with 2 tapes loaded, one empty) and an ErrorE1058 (Unrecoverable data error).
Well, i already replaced nearly my whole hardware, including my tapes, but i am not able to back up this darn server.
Has anybody made such an experiences as well and has a hint for me??
Tanks
Jochen