Nw 5.0 sp6a + AS 9.01 errors/problem

[joasve]

Hi folks,
I've upgraded my AS 9 to 9.01 and recieve two errors
after the upgrade. E21402 and E21028. It seems my
nwmkde.nlm is too old. It wants 7.94 and I have 7.00.
Also I need to upgrade my cachesetting in bti.cfg to
20% of system memory.

Where do I find version 7.94 of nwmkde.nlm. It looks
like it ships with NW6 (sql sp4)and later but I run NW 5.0.
(at the moment I'v changed in PFC.INI from 7.94 to
7.00 so the error doesn't show but it can hardly be
the right solution)

I've rewritten my bti.cfg according to novell/CA and
increased the cachesize to 32768 (also the others values
they recommend) but is that enough? I have 1,3 Gb memory
on server! That should be 262144 in chache but that seems
much...

regards Joasve

 

[Lou0686]

Hi,

You'll want to go to the Pervasive site listed below and download and apply Pervasive SQL 2000 Service packs 3 & 4.

Yes this is for NetWare.

It will upgrade your Btrieve to version 7.94.

You can run both patches before restarting the server.

It works, I've done it

Lou

 

[Lou0686]

Opps....here's the link.

http://www.pervasive.com/support/updates/index.asp