nVidia FX 1400 problem

[socaltony]

I recently began to experience a problem with startup/video. When I startup or the PC has been in 'sleep' mode, I get hte following message:

"out of range signal
cannot display this video mode
change computer display input to 1680 x 1050 @ 60 Hz"

When it initially happened I immediately checked my settings and they were correct: 1680 x 1050 @ 60 Hz. Since then the PC every now and then locks up with the mentioned memo. The following is my current system info:

NVIDIA System Information report created on: 05/15/2009 11:15:57


[Display]
Processor: Intel(R) Pentium(R) 4 CPU 3.60GHz (3591 MHz)
Operating System: Microsoft Windows XP (Service Pack 2)
DirectX version: 9.0c
GPU processor: Quadro FX 1400
ForceWare version: 175.51
Memory: 128 MB
Video BIOS version: 5.41.02.34.11
IRQ: 16
Bus: PCI Express x16

[Components]

nvCpl.cpl 1.5.700.53 NVIDIA Control Panel Applet
nvExpBar.dll 1.5.700.53 NVIDIA Control Panel
nvCplUI.exe 1.5.700.53 NVIDIA Control Panel
nvWSS.dll 6.14.11.7551 NVIDIA Workstation Server
nvViTvS.dll 6.14.11.7551 NVIDIA Video and TV Server
nvMoblS.dll 6.14.11.7551 NVIDIA Mobile Server
NVMCTRAY.DLL 6.14.11.7551 NVIDIA Media Center Library
NVOGLNT.DLL 6.14.11.7551 NVIDIA Compatible OpenGL ICD
nvDispS.dll 6.14.11.7551 NVIDIA Display Server
NVCPL.DLL 6.14.11.7551 NVIDIA Compatible Windows 2000 Display driver, Version 175.51
NV4_MINI.SYS 6.14.11.7551 NVIDIA Compatible Windows 2000 Miniport Driver, Version 175.51
NV4_DISP.DLL 6.14.11.7551 NVIDIA Compatible Windows 2000 Display driver, Version 175.51
nvGameS.dll 6.14.11.7551 NVIDIA 3D Settings Server

Any suggestions are greatly appreciated.

XPPro SP 2
Dell Precision PWS 380
Pentium 4 CPU 3.6GHz
3.59 GHz 2.0 GB Ram

 

[BadBigBen]

Try updating the driver to the latest version...

I've only encountered this message on the TFT and usually under X (Linux), where the monitor could not sync properly, e.g. Resolution was set at 58hz and monitor only could do 59hz and above...

Ben
"If it works don't fix it! If it doesn't use a sledgehammer..."
How to ask a question, when posting them to a professional forum.
Only ask questions with yes/no answers if you want "yes" or "no"

 

[socaltony]

Thanks for the tip.

I was thinking of upgrading but wanted to hear what others thought.

Thanks again!!!