We have been asked to get a Octel voice mail converted to NuPoint the lines that the OCtel handle are Analog Centrex lines. I beleive I can get it to work but am wondering what wil be needed to get Message lamping/Stutter dialtone activated. Anyone ever tackled something like this?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nupoint Voice Mail for Centrx lines
- Thread starter dclynch
- Start date
The latest Nupoint product is IP conly. You need PIMG or TIMG boxes to convert analog to IP. The Nupoint still supports Centrex integration so you should be able to replace the Octel. What is the voicemail connected to? Would you be able to abandon the Centrex lines in favour of straight IP? The PIMG and TIMG units are kind of pricy.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.
Waaaaaay back, I set up a Centrex Integration. The system required a data connection via RS232 (much like a Modem) to handle the messaging.
Inbound data would have ringing port and caller ID
Outbound data for Message Waiting Control
**********************************************
What's most important is that you realise ... There is no spoon.
Inbound data would have ringing port and caller ID
Outbound data for Message Waiting Control
**********************************************
What's most important is that you realise ... There is no spoon.
- Status
Similar threads
