Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NuPoint Record-A-Call Issue

Status
Not open for further replies.

LoopyLou

Technical User
Dec 4, 2005
2,539
CA
The record a call feature on a Nupoint doesn't require any licenses on the 3300.

The single biggest problem with communications is the illusion that it has taken place.
 
Verify that the option has been applied to the MAS.

Login as root to the MAS

type: lmget -l (memory vague not certain this is correct say 75%)

This will list the installed options.

If you don't have scrollback you can try lmget -l:more

**********************************************
What's most important is that you realise ... There is no spoon.
 
I have tried lmget -l tells me invalid command same for lmget-l

 
Finally remembered the command sorry

it is: getids -l


**********************************************
What's most important is that you realise ... There is no spoon.
 
ok i tried the getids -l and it listed everything owever i do not have the scroll back and getids -l:more is also invalid, you dont happen to remeber what it is so that i can look at it a few at a time or line by line?
 
Try it with a pipe symbol not a colon before "more".
getids -l|more

or you could try and dump it to a text file
e.g.
getids -l > dump.txt
 
Boy, I was obviously having a bad day on that first post.

Sorry for the mixup

Yes the command is: getids -l|more

**********************************************
What's most important is that you realise ... There is no spoon.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top