Nupoint PMS via Ipocket

[caknfd]

What is the correct port (IP Socket) to use when connecting a Nupoint to a PMS system via an Ipocket. Is there a specific port that should be used.

 

[619Tech]

I remember it being configurable, not a static port number. Your iPocket port settings must match your NP PMS port number setup in your NP external applications list. in the NP help, search PMS, then click on the "Configure IP Connectivity".

 

[caknfd]

Thanks for the reply. I finally called support as the documentation is really vauge about what port to use and we determined you have to set both the local and remote port in the iPocket to 5001 (if not being used by something else on the network.) and and then choose the same port in the nupoint under the external applications.