Nupoint Line Group Setup

[cknipe]

http://cknipe.u212.worldispnetwork.com/images/MEmas.jpg

check out that link. this was the start to my problems. there is a full functioning version of ME availible to upgrade to but no documentation is availible yet. Anyways since then I have spent the last day reinstalling Mitel Standard Linux, and each blade on the MAS server. I have ME back to working ok and I just got nupoint installed. It has been so long I forgot how to set the line groups. On the 3300 side, My nupoint hunt group is 5240 with 5241-5244 inside the hunt group. I know the nupoint line group consists of these extensions, though I forgot how I set this up a while back. The triplet part is whats throwing me off.

I set the line group as 5240. and assigned each line inside the group as 1:0:1, 1:0:2, 1:0:3, and 1:0:4. When viewing these through the NP console they show as:
1-5241(1:0:1)1-5242(1:0:2)1-5243(1:0:3)1-5244(1:0:4)

The hunt group is still out of service since the last reboot. Have I set the line group up incorrectly?

 

[cknipe]

actaully I found the fix.....the triplets start at 1:0:0...not sure if that matters...but I didnt have the 3300 info entered yet.

now that im done with that I im trying to setup the Active directory pluging but cant remember what to set the AD attribute to .