NuPoint Install (MSL)

[mitelmmaniac]

Hi,
I'm installing MSL on to a HP GL320 G6. Single HDD 160gb.

After testing the disk which comes back ok, I am getting an error saying my partition isn't big enough and there isnt enough disk space (Partition Failed: Could not allocate partitions as primary partitions. Not enough space left to create partition for /boot).

Is this a BIOS thing or is it something else. I haven't seen it before so I dont know where to start. Any help appreciated.

Cheers
MM

Desk Jockey Lunacy

 

[mitelmmaniac]

This server uses a Firmware/Driver-based RAID implementation that is not supported by
MSL. Do not use this configuration utility to set up storage arrays. Only MSL softwarebased
RAID is supported for this server. Leave the firmware-based RAID setting at its
default setting (disabled) and let MSL automatically configure RAID for this server. NOTE:
Click model number link to see the detailed test configuration for any other special BIOS
setting requirements

Now it wont recognise the keyboard to enter the Bios! anyone?



Desk Jockey Lunacy