Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Rhinorhino on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Nupoint Fax sending
- Thread starter Billz66
- Start date
With a single licence this is not possible.
You must have dedicated licenses for inbound and outbound so a minimum of 2 licenses are required.
Additionally, you would need to dedicate 1 of the voiceports to an outdial application (Pager Outdial).
**********************************************
What's most important is that you realise ... There is no spoon.
You must have dedicated licenses for inbound and outbound so a minimum of 2 licenses are required.
Additionally, you would need to dedicate 1 of the voiceports to an outdial application (Pager Outdial).
**********************************************
What's most important is that you realise ... There is no spoon.
- Thread starter
- #3
Ok so with 1 license can i change my current setup to be outgoing fax only ?
Our nupoint has an existing outdial group for Visual voicemail with UCA , can the fax use this paging group for outdialling?
Is there any documentation that gives step by step how faxing works for incoming and outgoing ? the online help is very confusing.
I think we will be alrigjht once we have managed to get it working as we will create our own setup notes.
If there is no documentation can you explain all that is required to allow outgoing faxing - customer is using the fax printer driver.
Server is MAs Ver 2.0.205.0 with NPM 14.0.1.10
Our nupoint has an existing outdial group for Visual voicemail with UCA , can the fax use this paging group for outdialling?
Is there any documentation that gives step by step how faxing works for incoming and outgoing ? the online help is very confusing.
I think we will be alrigjht once we have managed to get it working as we will create our own setup notes.
If there is no documentation can you explain all that is required to allow outgoing faxing - customer is using the fax printer driver.
Server is MAs Ver 2.0.205.0 with NPM 14.0.1.10
Also required to setup ougoing fax.
I have 10 outgoing licences and 2 fax ports
I have setup incoming fax reception ok, not problems, thru
Ling group 1 (triplet 1:0:0 - 1:0:4), voice, fax module 5:0 and 5:1 attached (Fax group 2)
For outgoing Pager dialer
Line 3 1:0:5 - 1:0:6, fax module 5:0, 5:1
Fax group 2
Pager system 3, attached to line group 3
access code T, Hold timer = 90
Fax Mailbox (610) call placement type 3 (Pager system 3)
fcos 20 assigned for fax bits
001 002 003 004 005 006 007 015 018 019 020 021 022 023 024 025 026 027 028 029
030 031 032 033 034 035 036 038 040 041 043 044 045 046 047 050 055 058 059 061
070 071 072 073 074 075 076 077 082 083 084 085 086 087 088 092 094 095 096 110
122 124 125 190 191 192 193 194 195 196 198 199 203 207 239 240 250 251 252 289
290 299 304
Installed fax printer on notebook to print from doc. When I print, log in to MB 610, enter fax number 0 12345678, fax is queued according to printer driver but nothing happens.
I ran, the event monitor and shows fax number dialed has too many digits dialed 012345678
System details
Nupoint only used for fax not general user mailboxes
MAS 2.2 / Nupoint 14
MCD 4.1sp1
I have 10 outgoing licences and 2 fax ports
I have setup incoming fax reception ok, not problems, thru
Ling group 1 (triplet 1:0:0 - 1:0:4), voice, fax module 5:0 and 5:1 attached (Fax group 2)
For outgoing Pager dialer
Line 3 1:0:5 - 1:0:6, fax module 5:0, 5:1
Fax group 2
Pager system 3, attached to line group 3
access code T, Hold timer = 90
Fax Mailbox (610) call placement type 3 (Pager system 3)
fcos 20 assigned for fax bits
001 002 003 004 005 006 007 015 018 019 020 021 022 023 024 025 026 027 028 029
030 031 032 033 034 035 036 038 040 041 043 044 045 046 047 050 055 058 059 061
070 071 072 073 074 075 076 077 082 083 084 085 086 087 088 092 094 095 096 110
122 124 125 190 191 192 193 194 195 196 198 199 203 207 239 240 250 251 252 289
290 299 304
Installed fax printer on notebook to print from doc. When I print, log in to MB 610, enter fax number 0 12345678, fax is queued according to printer driver but nothing happens.
I ran, the event monitor and shows fax number dialed has too many digits dialed 012345678
System details
Nupoint only used for fax not general user mailboxes
MAS 2.2 / Nupoint 14
MCD 4.1sp1
- Status
Similar threads
- Locked
- Question
- Locked
- Question
