Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Numbering plan Question

Status
Not open for further replies.

rlong411

MIS
Aug 30, 2004
15
US
I would like to remove a block of numbers from my Option 61c's numbering plan.
I know how to veiw them LD 20 or LD 11 ludn.

What I want to do is remove a block of 100 numbers 27xx from the PBX so that when I add a DSC in Ld 87 it routes to a PRI.
Currently those numbers will go to the operator because there are no extension configured for them. I want them to route instead.
 
you do not remove any numbers, I mean you have 0 thru 9 as does anyone. They are in play or not. If 27 is not in use & come up with ludn - they are sorta out of the pbx. So, you want to ADD them to usage, it is because they are out, they are following your intercept setup in 15. If you want to build 27 as a cdp or dsc, or lsc, do it in 87 and give it some place to go.
 
All numbers are there and you can not add or delete them, you just assign them to what you want to use them for.
 
You don't delete them, (unless they are in use on a phone at your main site.)
As soon as you program the DSC they will all route and can't be used as a local dn anymore.
 
Please help. I need to know is it safe to call forward to an outside line. Phone company says yes but I have my doubts. I know that I need to change cls to cfxa and cfw needs to be 11 numbers ie 9 418 xxx xxxx. Thanks.
 
JC124, What does your question have to do with this thread, start your own thread.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top