Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Numbering plan Poland
- Thread starter bsmo
- Start date
You need Definity Poland settings for what exactly?
There is DEFINITY Enterprise Communications Server
Application Notes for Type Approval .I have 1998 release. Have you this one?
Here is a short fragment for Poland:
System Parameter Administration
Only those feature-related parameters that may have a Type Approval or basic
connectivity implication for a particular country are listed here.
n System Parameters Features Administration
— Trunk-to-Trunk Transfer: Permitted by country’s regulations -
Selection is customer’s choice.
— Public Network Trunks on Conference Call: 5
— Conference Parties With PNTs: 6
— Conference Parties Without PNTs: 6
— Line Intercept Tone Timer: 30
— Night Service Disconnect Timer: 180 sec
— Short Interdigit Timer: 3 sec
— Unanswered DID Call Timer: 60
— Auto-Hold: Yes 16
— Attendant Tone: Yes
— Bridging Tone: No
— Conference Tone: No
— Intrusion Tone: Yes
— Repetitive Call Waiting Tone: No
— DID Busy Treatment: Attendant
— Pull Transfer: No
— Level of Tone Detection: Medium
— Outpulse Without Tone: Yes
— (Station-to-switch) Recall Timing:
- Flashhook Interval: Yes
- Upper Bound: 1100 msec
- Lower Bound: 600 msec
There is DEFINITY Enterprise Communications Server
Application Notes for Type Approval .I have 1998 release. Have you this one?
Here is a short fragment for Poland:
System Parameter Administration
Only those feature-related parameters that may have a Type Approval or basic
connectivity implication for a particular country are listed here.
n System Parameters Features Administration
— Trunk-to-Trunk Transfer: Permitted by country’s regulations -
Selection is customer’s choice.
— Public Network Trunks on Conference Call: 5
— Conference Parties With PNTs: 6
— Conference Parties Without PNTs: 6
— Line Intercept Tone Timer: 30
— Night Service Disconnect Timer: 180 sec
— Short Interdigit Timer: 3 sec
— Unanswered DID Call Timer: 60
— Auto-Hold: Yes 16
— Attendant Tone: Yes
— Bridging Tone: No
— Conference Tone: No
— Intrusion Tone: Yes
— Repetitive Call Waiting Tone: No
— DID Busy Treatment: Attendant
— Pull Transfer: No
— Level of Tone Detection: Medium
— Outpulse Without Tone: Yes
— (Station-to-switch) Recall Timing:
- Flashhook Interval: Yes
- Upper Bound: 1100 msec
- Lower Bound: 600 msec
About numbering plan may be you need ARS/AAR Administration
To place calls, set ARS to ON for CO phone calls. You should also to check all ARS/AAR defaults. All default ARS analysis codes are deleted before dialed strings are added for routing when DEFINITY is installed outside of North America. Be aware that the default for the 10 digits cause
dialing problems.
Lucent recommends only the following call types be used outside North America:
int: For all international numbers.
natl: For all national PN numbers.
pubu: For all other external (that is, not extensions) numbers.
To place calls, set ARS to ON for CO phone calls. You should also to check all ARS/AAR defaults. All default ARS analysis codes are deleted before dialed strings are added for routing when DEFINITY is installed outside of North America. Be aware that the default for the 10 digits cause
dialing problems.
Lucent recommends only the following call types be used outside North America:
int: For all international numbers.
natl: For all national PN numbers.
pubu: For all other external (that is, not extensions) numbers.
- Thread starter
- #4
- Status
Similar threads
- Locked
- Question
- Locked
- Question