Number subscribers Hipath 4000

[sllac]

Hi I have a H4K V.5 is possible to change the id number of a station for internal call? Thank's

 

[sbcsu]

Sure - just change the extension number itself.
Set Up a float number for its 'old' number and forward that if required to its new number.
Also in RUFUM you can forward in the Direct Dial In number to the different extension.

You could also setup key system functionality whereby the user presses a key to dial out on behalf of a different number on occasion.

Or you could 'pin on' to a float number to make a call and dial out using that floats number.

I guess it depends on the end user and what they want.

 

[sllac]

I didnt tell all my request, I have 4 DECT and i want to display only the same number when make a call internal to the other subscribers, without using KCSU. I don't now if is posible with different Amo's like KNMAT or something else.

 

[IPDA]

CHANGE-SBCSU:STNO=xxxx,SSTNO=Y,OFFTYPE=DI;

this is for no disply internally.

 

[sllac]

Maybe i'm not clear, i just want to know if is possible to display , when make a call from one of the 4 DECT to other subscribers, another number instead the mine or only the name of my device. Thank's

 

[donb01]

Unless someone else says otherwise, I'm going to say No. I have been trying to mask the ID of my individual call center phones so they only show the maun DNIT for years, and no one has been able to tell me how to do it. I can make the external number be anything I want, but not the internal one....

 

[sbcsu]

I think you can send out the main number of a hunt group as your extension number - I will have to check.
Yes it might be possible to use KNMAT also