Number presentation

[nschreuder]

Hi all,

I need some help please.

We have BC12SP11 and we want route 1 to send from some extensions prefix and number to called party.
With CUST 4 at the extension we can lead it to route 1 which also gets CUST 4, but how do we configure the route-parameters?

Below as how route 1 is now:
[tt]

<rodap:rou=all;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
1 SL60 H'00000344 H'10030000 H'44310000 NO

END

<rocap:rou=all;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
1 7110000000000010 5 3100000001 0 30 128 00151515 511100000030 111100

END [/tt]


Your answer is most appreciated.

Thank you in advance.

NCCOI


**************************************
“Science may never come up with a better
communication system than the coffee break.”
**************************************

 

[fouesnant]

Hi

Why don't you play with D4 and D10 of the ADC parameters for DTS?
This will give to you extension the right to send its number.
Then you have to set the RONDI command

 

[nschreuder]

Thank you for your reply, Fouesnant.
I have already used the ADC parameters but that's apparently not enough to achieve number presentation on B-party's phone. Please, can you also tell me which parameter of RONDI do i have to set to achieve number presentation?

Thanks again.





**************************************
“Science may never come up with a better
communication system than the coffee break.”
**************************************