NUMBER E&M WINK DIGITS MICS 4.1

[cnrj]

If necessary where do I change the number of wink digits the system will look for from the T1. I think the system default is 3 digits. Provider is sending E&M Wink 4 digits. Hope you understand my question. Thanks in advance for the help.

 

[PERRYPJ]

YOU DON'T CHANGE THE WINK YOU ARE CHANGING THE AMOUNT OF DIGITS YOUR TARGET LINE EXCEPT, WE SET OUR EXTENSION LENGHT THE SAME AS THE AMOUNT OF THE DIGITS THE CO WILL SEND AND NORMAL TRY TO TAKE THE CUSTOMER INTO THE SAME NUMBERING PLAN AS THE DID. LESS CONFUSION.
SO YOU WILL BE CHANGING THE DN LENGTH

OLD ROLMEN WORKING ON NORTELS

 

[jerryreeve]

You will find the length change at

System Programming->Rec'd Length

If the last three digits are unique yuo can leave the received length at 3 and ignore the first digit, if you will have different 1st digit then you may want to go to 4 dig dn's like suggested above,

GL



JerryReeve
Communications Systems Int'l
com-sys.com