Number Conversion. ****Urgent!

[sx0sx]

Hi Guys,

Currently my 1st TSW(6xxx series ext) is connected to a router(Netrix) using E&M(rou 77).
Then the 1st TSW is connected to my 2nd TSW(8xxx series ext) using a Q-sig(rou 67).

The idea is to make the 1st TSW as a transit whereby all incoming from Netrix that start wif 8xxx will be sent to the 2nd TSW via Q-sig.

My question is, how can i convert incoming call to the 1st TSW and then point it to the 2nd TSW whenever the received number start from 8xxx series number.

for example :
i used nutri like below but it wont work.

NUTRP:ENTRY=ALL;
NUMBER CONVERSION DATA

ENTRY CNVTYP NUMTYP ROU PRE TRC CONT BCAP HLC
8828 0 6 77 70068828 4

*7006 is a destination code to seize the Q-sig.
*8828 is basically a number that i receive from the E&M.


appreciate if someone can give a help. Thanks.

 

[mundus]

Hi' why not make a dest "8" from TSW1 to TSW2 and then use the recieved 8xxx to point out this dest ?
Normally you don't receive TON from a E&M connection, so here you must use the NUMTYP 5 ( Unknown ).

 

[sx0sx]

hi mundus!

i cannot use "8" for dest since it was a suffix digit for call pickup.

so, you mean i should do the programming as this? :

NUTRP:ENTRY=ALL;
NUMBER CONVERSION DATA

ENTRY CNVTYP NUMTYP ROU PRE TRC CONT BCAP HLC
8828 0 5 77 70068828 4

How about the CNVTYP? should i leave it as 0 which means as received B-number?

 

[mundus]

Yes, but keep it more simple:
ENTRY CNVTYP NUMTYP ROU PRE TRC CONT BCAP HLC
8828 0 5 77 7006

 

[whosrdaddy]

yet more simple is
[tt]
ENTRY CNVTYP NUMTYP ROU PRE TRC CONT BCAP HLC
8 0 5 77 7006
[/tt]
(do not forget to use monotags (tt) folks)

please show rocap, rodap and roddp:dest=7006

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[sx0sx]

thanks for replying.

here is the rocap and rodap for both q-sig and E&M.

For Q-sig :
ROCAP
<ROCAP:ROU=67;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
67 0110000000000010 5 3110000000 0 30 128 03050515 311100100031 111111

RODAP
<RODAP:ROU=67;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
67 SL60 H'00000310 H'15400000 H'06B00000 NO


RODDP DEST=7006
<RODDPEST=7006;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
7006 67 06061000000002500060000000 0 5 0


THIS IS WHERE THE INCOMING COMES FROM (E&M)
ROCAP
<ROCAP:ROU=77;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
77 0120000000000010 7 2110000000 0 30 128 00050515 211100000000 001100

RODAP
<RODAP:ROU=77;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
77 TL22 H'031F0132 H'00012040 H'00011000 NO

 

[mundus]

You need to open up for number conversion, last digits in SERV - 2110000001.

 

[sx0sx]

Thanks, i will give it a try. will update u guys the outcome.