NTP errors

[BikeTours]

I would like to synchronize my PBX - it is an 81C that has been upgraded to CS1000 - to the computer network which has a Network Time Protocol source.

I can't find much in the way of documentation in regards to the NTP process. Working from what I could source it appears that I have made some progress.

That being said I am getting an error message and I am not exactly sure why.

I am hoping a group member can suggest what is the source of the problem and step me through the solution.

----------------

OVL000
>LD 117
OAM000

=> prt ntp
Primary IP Address: 192.168.80.254
Primary Key ID: 0
Secondary IP Address: 0.0.0.0
Secondary Key ID: 0
Minimum Threshold: 1
Warning Threshold: 6
Maximum Threshold: 16
Security Mode for Primary: INSECURE
Security Mode for Secondary: INSECURE
Time Interval and Offset: 24 30
Synchronization Status: INACTIVE
UTC Offset: 00:00
Mode of communication: CS

=> prt elnk
ACTIVE ETHERNET: "OPTION81C" "192.168.80.4"
INACTIVE ETHERNET: "SECONDARY" "192.168.80.5"
OK

=> PING 192.168.80.4

PING 192.168.80.4 SUCCESSFUL

=> Ping 192.168.80.5

PING 192.168.80.5 SUCCESSFUL

=>ping 192.168.80.254

PING 192.168.80.254 SUCCESSFUL


=> enl ntp
NTP task exists
NTP is running in CS mode.
Mode of security for Primary:INSECURE
Mode of security for Secondary:INSECURE
NTP feature is enabled.


=> sync ntp man
Trying 192.168.80.254......Please do not abort from overlay till sync operation is executed
NTP is not running in secured mode
" ERR0064": Primary NTP Server is not in good health. IP Address: 192.168.80.254

=> sync ntp background
" SCH2176": NTP is already running in background mode.

 

[gberger]

Check in the :Nortel CS1000 (Meridian) systems forum