Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NTLM authentication
- Thread starter cchen
- Start date
you need to set NTLM on the telnet server to "0".
1. Make sure that the telnet service is running.
2. Go to the telnet server administration
3. Select option 3
4. Set NTLM to "0"
5. stop and restart the telnet service
6. reconnect using hyperterminal
you should be good to go.
1. Make sure that the telnet service is running.
2. Go to the telnet server administration
3. Select option 3
4. Set NTLM to "0"
5. stop and restart the telnet service
6. reconnect using hyperterminal
you should be good to go.
- Status
Similar threads
- Locked
- Question
- Locked
- Question