Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT4n39AAE5 (CP-PIV)not work, no access by J-25

Status
Not open for further replies.

amyygt

Programmer
Sep 8, 2005
72
US
nt4n39AA not work, no access to information by J-25

I was performing the procedure PSN003383u wait for over an hour as indicated, cards with the problem may have to wait an hour or more before re-inserting for the card to power up correctly and start functioning again.

But it did not work the CPU, the System Utility card is dark and does not boot.

Replace Utility System and the problem continues.

I'm not sure if changing the NT4N39BA card is resolved.

Someone happened something similar and as resolved.

regards
 
 http://files.engineering.com/getfile.aspx?folder=658f44f9-d06f-4456-b8a9-607d5fa3d6bf&file=CPU1_error.JPG
Up dates

Perform the procedure to stop the NT4N39AA card without power for two hours and did not work the CPU.

I installed another NT4N39AA card that provided me the client and work the CPU. (GOOD)

But I made a procedure that is not documented, as this CPU was not loaded with the right software, you swap the Compac flash and up.

This will bring me problems in the future.?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top