Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT1P63AA Flashing, Phone calls to that node sound like electrical shocks that match the card flashin

Status
Not open for further replies.

x11

Instructor
Feb 11, 2008
29
US
Hi All, Hope your all well. Card in the option 11 cabinet seems ok. It is the light in the 81 that is flashing Tested Fiber (just light test) changed out MM Cords on both sides. Self test on card passed I am going to be driving for both cards. We dont have in stock. Just wanted to throw this out to all you and see if anybody has any help or input. As always thanks in advance for any help campus environment and luck will have this loop 24 has campus security on it lol!! John

Cursed and Blessed is the day that we decided telcom would be our profession.
 
The NT1P63AA is a daughter board on either the NT1P61 or the NT1P62. What light is flashing?
 
Hi KCF, Thanks for replying!!! The light WAS (lol) on the daughterboard. It WAS the fiber status light on 63. I think you can tell by my use of the word WAS, it is fixed. Yay!!! had to drive to Paragon in boston to go get the parts but it was worth it. Turns out to be the Remote Controller 63 that was bad but i replaced both sides, all parts anyway. I never saw that light flash before solid, yes, but not flash. Strange that the remote fiber controller (61) was the issue and it had no indication of trouble. also both cards "self" tested fine AND would show go when i looped the back with a single fiber patch cord. So I hope this thread helps someone to. Thanks so much for responding!!!!


john

Cursed and Blessed is the day that we decided telecom would be our profession.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top