Good day all,
I was wondering if anyone could explain why I am having an issue with finding the Domain Controller during netlogon. I have a WINS server in a DMZ which I have successfully joined the NT Domain in the Inside network of the PIX, however, my success ends there. I can:
Ping the PDC by netbios name
Ping the PDC by IP
Join the NT Domain
From comman prompt use the Net Use command to connected to and login to the PDC.
The WINS server for the DMZ has a static entry to identify the PDC as the Domain Controller and Master Browser [1Ch] and [1Bh] respectively.
Yet, in the end when I try to login, I get a Domain Controller not found error.
The PIX has two interfaces with one on the DMZ and one on the Inside network, and no NAT. So routes aren't necessary because the PIX is aware of the only 2 networks it needs to know.
Could the default gateway of the PDC, which points to another router on the network... not the PIX be the problem? Although I did add a route on the PDC to point to the PIX to get to the DMZ's subnet.
Hope someone can help.
Thanks in advance,
-D
I was wondering if anyone could explain why I am having an issue with finding the Domain Controller during netlogon. I have a WINS server in a DMZ which I have successfully joined the NT Domain in the Inside network of the PIX, however, my success ends there. I can:
Ping the PDC by netbios name
Ping the PDC by IP
Join the NT Domain
From comman prompt use the Net Use command to connected to and login to the PDC.
The WINS server for the DMZ has a static entry to identify the PDC as the Domain Controller and Master Browser [1Ch] and [1Bh] respectively.
Yet, in the end when I try to login, I get a Domain Controller not found error.
The PIX has two interfaces with one on the DMZ and one on the Inside network, and no NAT. So routes aren't necessary because the PIX is aware of the only 2 networks it needs to know.
Could the default gateway of the PDC, which points to another router on the network... not the PIX be the problem? Although I did add a route on the PDC to point to the PIX to get to the DMZ's subnet.
Hope someone can help.
Thanks in advance,
-D