Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NT 4.0(sp5) Warning message

Status
Not open for further replies.

Jong99

Programmer
May 26, 2003
1
US
How to improve this problem.
MS-Windows NT 4.0 (sp5)

Warning Message:
*--------------------------------------------------------------------
Event Detail:
Date: 25/6/2003 Event ID: 9502
Time: 8:54:19 Source: NwlnkIpx
User: N/A Type: Warning
Computer: FFB-SYS Cateqory: None

Description:
A SAP announcement was sent over \Device\NwlnkIpx which is configured for multiplenetworks, but no internal network is configured. This may prevent machines on some networks from locating the advertised service.
*-------------------------------------------------------------------

Thanks advance
 
You have NWLink configured on your server, which is Microsoft's version of Novell's proprietary network protocol. It is broadcasting via the Service Advertising Protocol to let other deviced know that it is available, but it needs an internal network number to identify itself properly. You should find a selection on the "Advanced" tab of the NWLink properties for setting an internal network number. It can be any hexadecimal value with up to eight (I think) digits. I often just put "1" in there.

This is not likely to be causing a problem on your network, expecially if you are running NetBEUI or TCP/IP in addition to NWLink.

Skip Tarrant
eXpert Data Solutions
Joplin, MO
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top