NSA220 wireless N - Wireless users cannot see wireless printer

[DotNetNewbie]

Hi there,

I am new to the Sonicwall FW and would like some help...

I have installed the 220 wireless n unit, successfully managed to create the LAN rules and VPN rules. However for users who connect via the wireless do not seem to be able to connect to the wireless printer.

Any user who is wired to the LAN can ping and access the wireless printer.

This makes me think there is a rule missing, but I have no point of reference - any help most welcome.

There are 2 rules in the WLAN > LAN:

1 W0 Subnet Any Any Allow All
2 Any Any Any Deny All

Both rules were created by default.

I also wasnt sure if it should be a WLAN > WLAN rule?

Many thanks in advance.

 

[DotNetNewbie]

Hi there,

Found the answer. I had a conflict on a VLAN which was causing the issue. Once the VLAN was removed it all worked.