alchemist777
Programmer
Hi,
We need to broadcast a pre-recorded OGM to a full conference group of SIP speakers on the user's demand.
I'm trying to setup the Build-in Automatic Paging paging feature of the system. The only doc I can find on it is the Summery Rev1.2 October 2019 which advises a feature code of *32*1+(Group No.)+(OGM No.)+(Repeat counter) The system produces reorder tune straight after the *32*1
We have setup the conference group with one speaker, OGM recorded and enabled “Conference Group Call Operation” for the users COS
Wondering if anyone has had any experience of this feature or point me in the direction of a solution/further documentation
Thanks in advance
Independent Engineer
Avaya IP Office - ACSS, Panasonic and Samsung PBX's
We need to broadcast a pre-recorded OGM to a full conference group of SIP speakers on the user's demand.
I'm trying to setup the Build-in Automatic Paging paging feature of the system. The only doc I can find on it is the Summery Rev1.2 October 2019 which advises a feature code of *32*1+(Group No.)+(OGM No.)+(Repeat counter) The system produces reorder tune straight after the *32*1
We have setup the conference group with one speaker, OGM recorded and enabled “Conference Group Call Operation” for the users COS
Wondering if anyone has had any experience of this feature or point me in the direction of a solution/further documentation
Thanks in advance
Independent Engineer
Avaya IP Office - ACSS, Panasonic and Samsung PBX's