Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations dencom on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NRS

Status
Not open for further replies.

krasemeer

Technical User
Dec 31, 2007
60
JO
When i try to open NRS I get this message :

error :NRS manager is not accessible when neither gatekeeper nor sip proxy / redirect application is enabled.
enable the application(s). reboot the signaling server then access NRS manager again. (wc030).

I configered the NRS as primary GK+SIP.
any idia where to enable it pls.

regards
 
From the CLI on the SS/NRS try nrsDBShow to see if it's running.
 
I believe the Gatekeeper functionality has to be checked off in the configuration before NRS services can be configured. Might be a spot to double check.?

TGD
 
Sorry the GateKeeper box is right above/below where you determine if NRS is going to Primary/Alternate/Failsafe
of the Signalling Server to be utilized In EM try IP Telephony/ Node Configuration/Signal Server - gatekeeper checkbox.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top