Has anyone had any luck with using the Nortel NRS "Network Post Translation" working in their NRS?
Facts:
1. We have an application that works in the CDP domain for dialing user extensions from an auto attendant.
2. We have an overlap of our 4 digits between different sites. That works fine when dialing users via the UDP prefixes.
3. A possible solution we have thought about was setting up a separate CDP Entry for each site, and put the local PBX in that site along with its local CDP Range.
4. The trouble we have is that we can't create the same Static Gateway entry in multiple sites on the NRS, we get error stating unique IP address required. Our thought is that the "Network Post Translation" should be able to do some type of digit manipulation or changing the SIP Context after routing.
Just looking to see if anyone has successfully used the Network Post Translation feature.
Thanks!
Facts:
1. We have an application that works in the CDP domain for dialing user extensions from an auto attendant.
2. We have an overlap of our 4 digits between different sites. That works fine when dialing users via the UDP prefixes.
3. A possible solution we have thought about was setting up a separate CDP Entry for each site, and put the local PBX in that site along with its local CDP Range.
4. The trouble we have is that we can't create the same Static Gateway entry in multiple sites on the NRS, we get error stating unique IP address required. Our thought is that the "Network Post Translation" should be able to do some type of digit manipulation or changing the SIP Context after routing.
Just looking to see if anyone has successfully used the Network Post Translation feature.
Thanks!
