NRS Endpoint gets fast busy

[jacabuk]

I have an endpoint which is a server. when i call the five digit extension to reach the server, I get a fast busy. i can ping the far end server. i checked the logs for the NRS server and i have repeating Internal process flow through provisioning engine is disabled. Is this error related to the fast busy

 

[KCFLHRC]

Have you put this entry in CDP ??

 

[jacabuk]

yes it is. this is a sip route where all the other endpoints are working except this one

 

[KCFLHRC]

Do you see this end point registered ?

 

[jacabuk]

How do i check that? i don't remember

 

[KCFLHRC]

Under Domains, you should see the number of gateway endpoints

 

[KCFLHRC]

Forget that, under endpoints you should see if it is registered or not

 

[KCFLHRC]

Under gateway endpoints

 

[jacabuk]

thanks, i found out that a sip gateway won't show if is registered or not. i turned on dch messaging and determined a problem with their server

 

[KCFLHRC]

If you see the IP address of the server in NRS then I believe you can assume it's registered. Otherwise it will show Not Registered. That's what mine shows anyway on a Static Sip Endpoint as well as a Dynamic SIP endpoint