NPM Licensing for RAC - Demo Kit vMAS

[danramirez]

Hi Guys,

We have a vMAS with a little bit of every license for testing. Where can we check if this DEMO kit has got licenses for Record a Call within NPM?

We need this information befor selecton ports as 5020 or 5240.

Regards,

Daniel

http://www.hatkana.com

http://www.wtelecom.com

 

[LoopyLou]

You have access to the AMC record for the system? It would certainily be listed there.

I'd tell you a UDP joke but I'm afraid you won't get it. TCP jokes are the best because you always get them.

 

[danramirez]

Loopy, this is what the AMC record says. I don't see anything that refers to RAC. However, I got this response from Presales Helpdesk:


Record-A-Call is not really a Nu Point feature. When you use RAC on MCD what happens is that MCD conferences in the users voicemail box.
So in effect RAC is a MCD feature that works with the embedded messaging and Nu Point.
The bit is SWB that asks "How many ADDITIONAL MCD controllers are being connected that will use the Record-A-Call feature? " is asking about Additional MCD controllers NOT the PRIME controller.

So, basically, yes RAC is included in the MAS demo


Option Value
AWC Audio Ports 6
AWC Web Sessions 6
UC Mobile Users 2
[018] NuPoint Config SMDI Enabled
[019] NuPoint Config MWI Enabled
[022] NuPoint Reception Enabled
[038] NuPoint Fax Ports 1
[042] NuPoint Enhanced I-Band Enabled
[047] NuPoint Unified TCP/IP Enabled
[052] NuPoint View Enabled
[054] NuPoint Admin GUI, Call Director Enabled
[105] NuPoint CLID Enabled
[122] NuPoint Admin Enabled
[123] NuPoint Admin Server Enabled
[131] NuPoint Lan Backup Enabled
[132] NuPoint UM-SMTP Enabled
[133] NuPoint MWI Starter Kit Enabled
[141] NuPoint IP Integration Enabled
[144] NuPoint IP ADV UM System Enablement Enabled
[250] NuPoint FPSA Enabled
[306] NuPoint Port Enable 7 (MAX = 60)
[308] NuPoint Max Hour Lock 960
[309] NuPoint Port Lock 120
[310] NuPoint UM Webview Sessions 50
[315] NuPoint Language Options 9
[320] NuPoint Call Director Personal 11
[323] NuPoint Advanced UM 6
[324] NuPoint Text To Speech Ports 1
[325] NuPoint IP Integration Tally 1
[326] NuPoint Speech AA Ports 1
[327] NuPoint Speech AA Corporate Directory 11
[329] NuPoint Standard Unified Messaging 6
[330] NuPoint Outbound Fax User 2
[332] NuPoint Unified Messaging VoiceMail Box Users 10
[501] NuPoint American English Enabled
[504] NuPoint German Enabled
[508] NuPoint Numeric Full Enabled
[510] NuPoint Canadian French Enabled
[514] NuPoint British English Enabled
[516] NuPoint Latin Spanish Enabled
[520] NuPoint French (EURO) Enabled
[601] NuPoint Numeric Overlay Enabled
[602] NuPoint Agent - American English Enabled
[603] NuPoint Agent - British English Enabled
[800] NuPoint Dutch Enabled
IPv6 Protocol Disabled
MBG Max Users 5000
WebProxy Yes
Unified Communicator ACD Users 0
Unified Communicator Console 1
Unified Communicator Processors 1
Unified Communicator Softphone Users 3
Unified Communicator Users 3
Unified Communicator MobileWeb 1

http://www.hatkana.com

http://www.wtelecom.com

 

[Billz66]

you need to add the free license to the ARID
54001627 NuPoint Messenger: Record-A-Call

Then getids should show it as Installed but disabled

Then loginto the console as admin and select Install Mitel app suite
Select 3300
Select Record a call option
( you will need the Nupoint DVD)

After that getids should show it as enabled
Then change all you nupoint ports from 5020 Ip to 5240 IP

Restart the nupoint

ALLOW FCOS 291 in Nupoint for users

give them a record a call button

If I never did anything I'd never done before , I'd never do anything.....