Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NPIV and fcsX queue_depth on VIOS (physical) and LPAR (virtual) HBAs.

Status
Not open for further replies.

w5000

Technical User
Nov 24, 2010
223
PL

is it enough to set queue_depth for virtual HBAs on client LPAR only or also queue_depth for physical adapters which are used in background on VIOS should also have some higher queue_depth set before they are configured in "NPIV"?

are there any others physical HBA attributes to be adjusted on VIO Servers to avoind i/o bottlenecks on client LPARs?

the memory on VIO servers is enough (I calculated 300MB per single virtual HBA - recommendations I found were 140MB for each)


thanks in advance for any tips
 

of course I meant fcsX and fscsiX attributes - is it enough to tune only virtual fcs/fscsi on client LPAR or the same setting must also be set for physical HBA's devices on VIOS site (the ones which virtual ones are mapped to)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top