Novell client on Presentation 4

[pipil2]

Hello all,
I have and issue with the Novell client(4.91 sp3) on Presentation 4 I did install the novell client after citrix and applications were installed, I did the following(from citix forums):

1. Open regedt32.
2. Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon.
3. Double-click the value ginadll.
4. Change the value from ctxgina.dll to msgina.dll.
5. Install the Novell Client.
NOTE: Do not reboot the server!
6. Return to the registry.
7. Change the ginadll value from nwgina.dll to ctxgina.dll.
8. With the winlogon key selected, go to the menu and select add value. The value name is ctxginadll.
9. The type is reg_sz and the string is nwgina.dll (changes are not case-sensitive).
10. Reboot the server.

I did this but still won't work... if I get the full desktop I get the client but when I click on a published application, it goes directly and opens and no novell client is presented.
can anybody give a clue of wahts going on?

thanks.

 

[pipil2]

Anybody? please help...

 

[jfp23]

Do you have the client set to do pass through? If so you will never see the client. Second I'm not sure you did all the registry hacking, I haven't needed to do that since Metaframe 1.8 days, but then I always install the netware client before installing Citrix.

 

[pipil2]

Hello,
I had the pass thru on, Im going to disable it and try. I didn't do anything on the registry, Do I have to do it? I did installed the client before citrix. thanks for the tip.

 

[enigma99]

pipil2,
Here is the article provided by Citrix and Novell.
I've done this before and it works like a charm.

http://support.citrix.com/servlet/K...CitrixandNovellIntegration_revised_231006.pdf

After you install the client on your Citrix server you have to modify an entry on the Citrix farm level.

Hope that helps.

 

[enigma99]

pipil2,
Here is the article provided by Citrix and Novell.
I've done this before and it works like a charm.

http://support.citrix.com/servlet/K...CitrixandNovellIntegration_revised_231006.pdf

After you install the client on your Citrix server you have to modify an entry on the Citrix farm level.

Hope that helps.

 

[pipil2]

Eneigma,
Thanks so much for you help, I will try it tomorrow and let you know...thanks.